Assembling And Dismantling The Two-Piece Shaft (327Rdx) - Husqvarna 323RII Operator's Manual

Clearing saw
Hide thumbs Also See for 323RII:
Table of Contents

Advertisement

Position the handlebar as shown. Fit the mounting
components and tighten the knob lightly.
Put on the harness and hang the machine from the
support hook. Now make a final adjustment so that
the machine is in a comfortable working position when
it hangs from the harness. Tighten the knob.
Assembling and dismantling the
two-piece shaft (327RDx)
Assembly
Loosen the coupling by turning the knob.
Align the tab of the attachment (A) with the arrow on
the coupling (B).
B
ASSEMBLY
A
Push the attachment into the coupling until the
attachment snaps into place.
Before using the unit, tighten the knob securely.
Dismantling
Loosen the coupling by turning the knob (at least 3
times).
Push and hold the button (C). While securely holding
the engine end, pull the attachment straight out of the
coupling.
C
English
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents