Getting Started - RCA RTV86073 User Manual

Getting Started

5) Use the DOWN navigation button to select the TV source and then select Air or CATV.
6) Select the Auto Scan or Auto Scan Add CH option and press the RIGHT/VOL+button to start
auto search. (It will search for all available channels in your area)
7) After completing the Auto Scan, use the channel
(remote control only) to select a TV channel.
The Auto Scan feature will perform a fresh scan, erasing previously scanned channels.
The Auto Scan Add CH feature will perform a scan and add any channels found to those
previously scanned. Auto Scan Add CH is very useful if you want to scan (and retain)
channels found when the TV is used in different locations.
For good reception, place the antenna as close as possible to a window of your house,
and as far away as possible from the portable TV.
Don't place the antenna near other machines/appliances (such as motors, computers,
switching power, TVs, power amplifiers, speakers... etc), since these machines/
appliances can cause interferences to the antenna.
To conserve power while the TV is not in use, the power switch on the left side
should be turned to the OFF position.
R F CH 18
Found
2
Analog
1
Digital
1
Press MENU to exit auto scan
/ button or numeric buttons
E-10