Basic Working Techniques; Safety Instructions After Completing Work; Changing The Hedge Trimmer Angle - Husqvarna 324HDA55 X-series Operator's Manual

Safety instructions after completing work

• The transport guard should always be fitted to the cutting
attachment when the machine is not in use.
• Make sure the cutting attachment has stopped before
cleaning, carrying out repairs or an inspection.
Disconnect the HT lead from the spark plug.
• Always wear heavy-duty gloves when repairing the cutting
attachment. This is extremely sharp and can easily cause
cuts.
• Store the machine out of reach of children.
• Use only original spare parts for repairs.

Basic working techniques

• Work with a swinging action from the bottom upwards
when trimming sides.
• Adjust the throttle setting to suit the load.
• When trimming a hedge the engine should always face
away from the hedge.
• Hold the machine as close to your body as possible to get
the best balance.
• Make sure that the tip does not touch the ground.
• Do not rush the work, but work steadily until all the
branches have been cut back cleanly.
10 –
English
SAFETY INSTRUCTIONS

Changing the hedge trimmer angle

• Undo the knob.
• Press the cutting head against the ground or some other
solid object until the desired angle has been obtained.
• Tighten the knob.
WARNING! Do not hold the cutting head
!
when you adjust the angle. The blades are
sharp and you could easily cut yourself.