Husqvarna 227R, 227RD, 232R, 232RD, 235R Operator's Manual page 29

Weekly
maintenance
1.Check the starter, the
starter cord and the return
spring.
2.Make sure that the
vibration damping
elements are not damaged.
3.Clean the outside of the
spark plug. Remove and
check the electrode gap.
Adjust the gap to 0.5 mm
or change the spark plug.
4.Clean the cooling fins on
the flywheel.
5.Clean or replace the
muffler's spark arrest
screen (not on mufflers
with a catalytic converter).
6.Clean the carburettor area.
7.Clean the cooling fins on
the cylinder and check that
the air intake in the starter
unit is not blocked.
8.Check that the angle gear
is 3/4 filled with grease.
Fill if necessary using
special grease.
MAINTENANCE
1
2
3
0,5 mm
4
5
6
7
8
Monthly
maintenance
1.Clean the fuel tank.
2.Clean the carburettor and
the area surrounding it.
3.Clean the fan and the area
around it.
4.Check the fuel filter and the
fuel pipe, replace if
necessary.
5.Check all cables and
connections.
6.Check the clutch, clutch
springs and the clutch drum
with regard to wear.
Replace if necessary.
7.Change the spark plug.
8.Check and clean the
muffler's spark arrest screen
if necessary (only mufflers
with a catalytic converter).
1
2
3
4
5
6
7
8
English –
29