Technical Data; 225H60; 225H75; Ec Declaration Of Conformity - Husqvarna 225H60 Operator's Manual

Technical data

Engine
Cylinder capacity, cu. in/cm
Cylinder bore, inch/mm
Stroke length, inch/mm
Idling speed, rpm
Recommended max. speed, rpm
Max. engine output, acc. to ISO 8893
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrod gap, inch/mm
Fuel lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, US pint/ litres
Weight
Weight without fuel, Lbs/kg
Noise emissions (see note 1)
Sound power level, measured dB(A).
Sound power level, guaranteed L
Sound levels (see note 2)
Equivalent sound pressure levels at the user's ear,
measured acc. to EN ISO 11806 and ISO 7917,
dB(A):
Vibration levels
Vibration levels on the handles measured acc. to
EN ISO 11806 and ISO 7916, m/s
Idling, rear/front handles:
Max. speed , rear/front handles:
Blades (double sided)
Length, mm
Blade speed, cut/min
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.

EC declaration of conformity

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46 36-146500, declare under sole responsibility that the hedge
trimmers Husqvarna 225H60 and 225H75 with serial numbers from year 2002 and onwards (the year is clearly stated in
plain text on the type plate with subsequent serial number), are in conformity with the following standards or other
normative documents following the provisions in the COUNCIL'S DIRECTIVE:
- of June 22 1998 "relating to machinery" 98/37/EC, annex IIA.
- of May 3 1989 "relating to electromagnetic compatibility" 89/336/EEC, and applicable supplements.
- of May 8, 2000 "relating to noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN292-2, CISPR 12:1997, EN774.
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has performed voluntary type
examination on behalf of Husqvarna AB. The certificates are numbered: SEC/96/310, 01/094/006 – 225H60, SEC/96/311,
01/094/006 – 225H75.
Huskvarna 3 January 2002
Bo Andréasson, Development manager.
TECHNICAL DATA
3
dB(A).
WA
2

225H60

1,55/25,4
1,34/34
1,10/28
2 700
11 000-11 700
0,9 kW/ 9 000 rpm
Yes
Yes
Walbro MB/CD
Champion RCJ 7Y
0,02/0,5
Walbro WT
0,85/0,4
12,1/5,5
106
109
95,1
2,3/2,0
3,0/2,3
600
2 480
) in conformity with EC directive 2000/14/EC.
WA
(Applies to Europe only)

225H75

1,55/25,4
1,34/34
1,10/28
2 700
11 000-11 700
0,9 kW/ 9 000 rpm
Yes
Yes
Walbro MB/CD
Champion RCJ 7Y
0,02/0,5
Walbro WT
0,85/0,4
12,6/5,7
106
109
95,1
2,2/1,5
2,2/1,5
750
2 480
19
English –