Table Of Contents; Before Using A New Machine; List Of Contents - Husqvarna 225E Operator's Manual

Before using a new machine

• Read the Operator's Manual carefully.
• Check the assembly and adjustment of the cutting equipment.
See page 13.
• Start the machine and check the carburetor settings.
See page 16-17.
IMPORTANT! A too lean carburetor adjustment significantly
increases the risk of an engine breakdown.
Insufficient care of the air filter will cause deposits on the spark
plug resulting in starting difficulties.
Maintenance, replacement, or repair of the emission
control devices and systems may be performed by any
nonroad engine repair establishment or individual.
!
WARNING!
Under no circumstances may the design of
the machine be modified without the permis-
sion of the manufacturer. Always use genuine
accessories. Non-authorised modifications
and/or accessories can result in serious
personal injury or the death of the operator or
others.
Your warranty does not cover damage or
liability caused by the use of non-authorized
accessories or replacement parts.
CONTENTS
SYMBOL EXPLANATION
Symbols ............................................................................... 2
CONTENTS
Before using a new machine ............................................... 3
List of contents .................................................................... 3
SAFETY INSTRUCTIONS
Personal protective equipment ............................................ 4
The machine's safety equipment ......................................... 4
Control, maintenance and service of the machine's safety
equipment ............................................................................ 6
Cutting equipment ............................................................... 7
General safety instructions .................................................. 8
General working instructions ............................................. 10
Basic working techniques .................................................. 10
WHAT IS WHAT?
What is what on the edger? ............................................... 12
ASSEMBLY
Assembling the loop handlebar ......................................... 13
Assembling the angle gear ................................................ 13
Assembling the blade ........................................................ 13
FUEL HANDLING
Fuel mixture ....................................................................... 14
Fuelling .............................................................................. 14
START AND STOP
Control before starting ....................................................... 15
Start and stop .................................................................... 15
MAINTENANCE
Carburetor ......................................................................... 16
Muffler with catalytic converter .......................................... 18
Cooling system .................................................................. 18
Air filter .............................................................................. 18
Spark plug ......................................................................... 19
Angle gear ......................................................................... 19
Lubricating the flexible drive axle ...................................... 19
Adjusting the edger's cutting depth ................................... 19
Maintenance schedule ...................................................... 20
TECHNICAL DATA
225E .................................................................................. 21
FEDERAL AND CALIFORNIA EMISSION
CONTROL WARRANTY STATEMENT
Your warranty rights and obligations ................................. 22

List of contents

3
English -