Basic Working Techniques - Husqvarna 123HD60, 123HD65 Operator's Manual

Husqvarna hedge trimmer operator's manual
Hide thumbs Also See for 123HD60, 123HD65:
Table of Contents

Advertisement

Safety instructions after completing work
The transport guard should always be fitted to the cutting
attachment when the machine is not in use.
Make sure the cutting attachment has stopped before
cleaning, carrying out repairs or an inspection.
Disconnect the HT lead from the spark plug.
Always wear heavy-duty gloves when repairing the cutting
attachment. This is extremely sharp and can easily cause
cuts.
Store the machine out of reach of children.
Use only original spare parts for repairs.

Basic working techniques

Work with a swinging action from the bottom upwards
when trimming sides.
Adjust the throttle setting to suit the load.
When trimming a hedge the engine should always face
away from the hedge.
Hold the machine as close to your body as possible to get
the best balance.
Make sure that the tip does not touch the ground.
Do not rush the work, but work steadily until all the
branches have been cut back cleanly.
14 –
English
WORKING TECHNIQUES
123HD65
The hedge trimmer's rear handle can be set in three
positions by pulling out the catch. See figure. When the
handle is adjusted the hedge trimmer should be idling or
not running.
While working the handle should always be facing
upwards irrespective of how the hedge trimmer is
directed.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents