Replacing The Cpu Fan; Replacing The Thermal Module - Acer Aspire 5532 Service Manual

Replacing the CPU Fan

1. Align the screw holes on the CPU Fan and
Mainboard and replace the Fan.
3. Connect the Fan power cable to the Mainboard connector.

Replacing the Thermal Module

IMPORTANT: Apply a suitable thermal grease and ensure all heat pads are in place before replacing the Thermal
Module.
The following thermal grease types are approved for use:
Silmore GP50
•
Honeywell
•
Jet Motor 7762
•
The following thermal pads are approved for use:
Eapus XR-PE
•
1. Remove all traces of thermal grease from the CPU using a lint-free cloth or cotton swab and Isopropyl
Alcohol, Acetone, or other approved cleaning agent.
2. Apply a small amount of thermal grease to the centre of the CPU—there is no need to spread the grease
manually, the force used during the installation of the Thermal Module is sufficient.
96
2. Replace the three (3) screws to secure the Fan to
the Mainboard.
Chapter 3