Toshiba 2000 User Manual page 155

Portable pesonal computer
Hide thumbs Also See for 2000:
Table of Contents

Advertisement

X5
Enable
Dial tone detect
Disabled: The modem dials a call regardless of whether it detects a
Enabled:
Busy tone detect
Disabled: The modem ignores any busy tones it receives.
Enabled:
Result Codes:
n=0,1,2,3,4,5
OK
ERROR Otherwise
Zn
Recall stored profile
The modem performs a soft reset and restores (recalls) the configura-
tion profile according to the parameter supplied. If no parameter is
specified, zero is assumed. Either Z0 or Z1 restores the profile.
Result Codes:
n=0,1
OK
ERROR Otherwise
&Cn Data Carrier Detect (DCD) control
Data Carrier Detect is a signal from the modem to the computer
indicating that a carrier signal is being received from a remote modem.
DCD normally turns off when the modem no longer detects the carrier
signal.
Enable
dial tone.
The modem dials only upon detection of a dial tone, and
disconnects the call if the dial tone is not detected within
10 seconds.
The modem monitors for busy tones.
OK, RING, NO CARRIER, ERROR,
NODIALTONE, BUSY, CONNECT
<RATE>, RRING, NO BONGTONE,
DELAYED, BLACKLISTED, REORDER,
WARBLE, CALL WAITING DETECTED
Appendix C
C-7

Advertisement

Table of Contents
loading

Table of Contents