The warranty on this snow thrower does not cover items
that have been subjected to operator abuse or negligence.
To receive full value from the warranty, operator must
maintain snow thrower as instructed in this manual. Some
adjustments will need to be made periodically to properly
maintain your snow thrower.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season.
Once a year, you should replace the spark plug and
check belts for wear. A new spark plug will help your
engine run better and last longer.
Follow the maintenance schedule in this manual.
NOTE: Use only Original Equipment Manufacturer (OEM)
parts to service this unit. Failure to do so can cause the unit
to malfunction and pose a risk of injury to the operator.
BEFORE EACH USE
1. Check engine oil level.
2. Check for loose fasteners.
3. Check controls to be sure they are functioning properly.
Keep your snow thrower well lubricated (See "LUBRICA-
Always observe the safety rules when performing any
Maintain proper air pressure in both tires (See "PROD-
UCT SPECIFICATIONS" section in this manual).
NOTE: To seal tire punctures and prevent flat tires due to
slow leaks, tire sealant may be purchased from your local
parts dealer. Tire sealant also prevents tire dry rot and
SAE 30 Motor Oil
See "ENGINE" in
Keep tires free of gasoline and oil, which can harm