Advertisement
Quick Links
Advertisement
Summary of Contents for Phonic PPC1100
- Page 1 PPC1100/1200 USER MANUAL PPC1100 PPC1200 www.phonic.com...
-
Page 2: Safety Precautions
Your Phonic PPC 1100/ PPC 1200 was carefully packed in the factory and the packing box was designed to protect the unit from rough handling. We recommend that you carefully examine the packaging and its contents for any signs of physical damage, which may have occurred in transportation. -
Page 3: Table Of Contents
CONTENTS 1. INTRODUCTION ..................3 2. INSTALLATION ..................3 2.1 RACK MOUNTING ....................3 2.2 CONNECTORS ....................3 3.CONTROLS ....................4 4. SPECIFICATIONS ..................6... -
Page 4: Introduction
The Power Conditioner/Light Module may be installed in a standard 19 inch equipment rack. It requires 1.75 inches of vertical rack space and secures to the rack cabinet with four rack mount screws and cup washers. Normally PPC1100/1200 is installed at the top of rack for lighting equipment on the rack. 2.2 CONNECTORS It provides eight accessory outlets in rear panel, controlled by front switch and an additional unswitched outlet on the front panel. -
Page 5: Controls
3.CONTROLS PPC1100 PPC1200 1 1 1 1 1 . MASTER SWITCH: Use this switch to turn the power on and off for the rear eight outlets. The illuminated switch will come on when the power is on. 2 2 2 2 2 . - Page 6 6 6 6 6 6 . CIRCUIT BREAK: The front circuit breaket can be easily and quickly reset should the PPC 1100/ PPC 1200 be overloaded. 7 7 7 7 7 . DIGITAL LINE VOLTAGE DISPLAY: (PPC 1200 ONLY) This is for monitoring the input voltage. The number will tell you how much voltages has been sent to this unit. 8 8 8 8 8 .
-
Page 7: Specifications
4. SPECIFICATIONS Current rating: 15 amps PPC1200 only: including a Digital line voltage display Input voltage: either 100-120VAC 60Hz or 220-240VAC, 50Hz, depending on where you are located. Spike Protection Modes: Line to neutral, neutral to ground, line to ground. (PPC1200 only) Noise attenuation: Transverse and common modes: 20dB at 200K Hz, rising to >40dB, 1 to 100MHz.(PPC1200 only) Lamps: 7 watt night-light bulbs. - Page 8 www.phonic.com...