Available Sources And Conditions; Demonstration Images - Pioneer AppRadio SPH-DA110 Operation Manual

About AppRadio
Connect your MirrorLink device
Using the supplied cable for MirrorLink en-
ables you to connect your MirrorLink device to
this product.
Ü For connecting MirrorLink device, refer to
Installation Manual.
1 Set "App Connection Settings" to
"Others" before connecting your
MirrorLink device.
Ü For detailed procedures, refer to Setting
the type of the mobile device to be connected
on page 48.
2 Unlock your MirrorLink device and
then connect the device to this product.
The [MirrorLink] icon on the Home screen
changes to the active state for MirrorLink de-
vice, and you are now ready to use the
MirrorLink mode.
Ü For details of MirrorLink mode, refer to
Chapter 6.
p When you make hands-free phoning or use
your MirrorLink device as a Bluetooth audio
device, you must make the Bluetooth con-
nection, but do not have to make the wired
connection. The Bluetooth audio sound
may not output sometimes when
MirrorLink device is wired.
Ü For detailed procedures, refer to Register-
ing your Bluetooth devices on page 29.
Disconnecting your MirrorLink device
Pull out the USB cable after checking
that no data is being accessed.

Available sources and conditions

The available sources varies according to con-
ditions as follows.
Sources Conditions
Radio Always available.
iPod Available only when an iPod or
iPhone with 30-pin connector is con-
nected to this product.
Apps Available only when an iPhone or
Android device is connected to this
product.
The state of the [Apps] icon varies
according to the connected device
and its state.
Ü For details, refer to Using the
touch panel keys on page 12.
MirrorLink Available only when a MirrorLink
device is connected to this product.
Bluetooth Always available. When you listen to
(Bluetooth music, you must connect an audio
Audio) device to this product via Bluetooth
profiles (A2DP/ AVRCP).
Phone Available only when your mobile de-
vice is connected to this product with
Bluetooth wireless technology.

Demonstration images

If you do not operate this product for 30 sec-
onds while displaying the OFF screen, demon-
stration images are displayed.
When you turn the ignition switch off (ACC
OFF) and then turn it on again (ACC ON), the
demonstration images will not be displayed.
p If you reset the system, the demonstration
images will be displayed again.
Chapter
02
11
Engb