Configuring Your Daw For Automap 4 Control - Novation Impulse User Manual

English

Configuring your DAW for Automap 4 control

Automap 4 has two separate tasks to perform in your DAW, and needs to be correctly
configured to enable full control by Impulse. Firstly, you need to enable your various
plug-ins for use with Automap 4. This will not affect their normal operation in any way, however,
once enabled, you will be able to alter their parameters from Impulse. Secondly, you need to
configure your DAW so that its audio mixer can be controlled by Impulse. Automap 4 includes a
simple setup procedure to allow you to do this.
DAW compatibility:
At the time of writing DAWs officially supported by Impulse and Automap 4 are:
Mac:
Live
Pro Tools
Cubase
Logic
Reason
Windows:
Live
Pro Tools
Cubase
Sonar
Reason
NOTE: Check the Novation website for up to date compatibility information.
www.novationmusic.com/support
If your DAW is not listed, but supports HUI, you can still use Automap 4 to control its mixer
functionality. See the Automap 4 User Guide for more details.
Enabling your plug-ins and configuring your DAW
This is a simple procedure; locate the Automap icon in the Menu bar (Mac) or System Tray
(Windows); click on it and select Software Setup...; this will open the Automap Software
Setup window. Select your hardware and DAW and then click the Setup... button. From this
point, please follow the on-screen instructions and the Automap 4 User Guide.
30