Table of Contents
Advertisement
2.4 Button and Fader Functions
Number Button/Fader/Connection Does...
1
NUMBER Buttons
2
FIXTURE Button
3
MOVEMENT Button
4
SCENE Button
5
CHASE Button
6
PAN/TILT Wheels
7
USB Port
8
REC/ENTER Button
9
MENUS/ESC Button
10
BLACKOUT/DEL Button
11
RUN MODE/SWAP Button
12
LCD Screen
13
Faders
14
DMX Out
15
DC Input
16
Power On/Off
Number Buttons
•
In CHASE mode, press a number button, the chase will be activated or
deactivated.
•
In SCENE mode, press a number button, the scene will be activated or
deactivated.
•
In MOVEMENT mode, press a number button, the movement will be
activated or deactivated.
•
In FIXTURE mode, press a number button, a fixture will be selected or
deselected.
Faders
•
In FIXTURE mode, move a fader to adjust the DMX output value.
Pan/Tilt Wheels
•
In CHASE mode, PAN/TILT wheels are to adjust the chase speed and time
respectively.
•
In SCENE mode, nothing defined in PAN/TILT wheels.
•
In MOVEMENT mode, PAN/TILT wheels are to adjust the MOVEMENT
parameters.
•
In FIXTURE mode, PAN/TILT wheels are to adjust the output values of PAN/
TILT.
ProKontrol MH Manual Rev. A
Functions differently in different
modes.
When activated, the 16 number but-
tons fixture selection.
When activated, the 16 number but-
tons built-in movements/macros.
When activated, the 16 number but-
tons scene playback
When activated, the 16 number but-
tons are for chase playback.
Functions differently in different
modes.
Used for firmware updates and data
backup. FAT32 and FAT16 supported.
REC/ENTER
MENUS/ESC
BLACKOUT/DELETE
RUN MODE/SWAP
LCD Screen
Adjusts the DMX output value
DMX Out (3-pin)
DC Input
Power On/Off
Page 6
© 2013 Blizzard Lighting, LLC
Hide quick links:
Advertisement
Table of Contents
