Figure 6 - Husqvarna FSA 8400 D Operator's Manual

5L. ENGINE OIL DRAIN HOSE: Connects to oil drain
valve 3I. Use to drain engine oil.
5M. TRANSMISSION BYPASS VALVE: Turn counter
clockwise to open. Turn clockwise to close. Open
to push concrete saw.
5N. HYDROSTATIC TRANSMISSION PUMP.
5O. ALTERNATOR/WATERPUMP BELT: Self
Tensioning. See JohnDeere for replacements.
5P. ALTERNATOR: See John Deere for replacements.
50

FIGURE 6

6A. LIFTING BAIL: The saw can be lifted from this
point.
6B. OIL LEVEL CHECk: Dipstick indicates oil level.
Also an oil fill location.
6C. BELT GUARDS AND SHIELDS: Protects engine,
guards, drives, and cooling fan.
6D. FRONT GUIDE: Use to locate the path of the
diamond blade on the cutting line.
DO NOT OPERATE ENGINE WITH SHIELDS
REMOVED!
6E. FAN SHIELDS: Protects engine, cooling fan,
beltdrives and pulleys.
6F. REAR GUIDE: Use to locate the path of the
diamond blade on the cutting line.
6G. HANDLEBARS: Used to maneuver the saw. Not
to be used to lift the saw.
6H. ENGINE OIL FILTER: The Oil filter element needs
to be changed when changing oil. (100 hr)