Table of Contents
Advertisement
Symbols on the machine:
WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
•
Protective helmet
•
Hearing protection
•
Protective goggles or a visor
•
Breathing mask
WARNING! Dust forms when cutting, this
can cause injuries if inhaled. Use an
approved breathing mask. Avoid inhaling
petrol fumes and exhaust fumes. Always
provide for good ventilation.
WARNING! Sparks from the cutting blade
can cause fire in combustible materials
such as: petrol (gas), wood, dry grass etc.
Choke symbol
Stop symbol
Water cooling must always be used.
Always cut in the correct direction. See
safety instructions!
Other symbols/decals on the machine
refer to special certification requirements for certain
markets.
You will find the following labels on your power cutter:
2 –
English
KEY TO SYMBOLS
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of operating
hours for which the engine has been shown to meet Federal
emissions requirements. Category C = 50 hours, B = 125
hours, and A = 300 hours.
Symbols in the operator's manual:
Switch off the engine by moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Run position.
Choke lever in "closed position".
Choke lever in "open position".
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.
The engine exhaust from this product
contains chemical known to the State
of California to cause cancer, birth
defects or other reproductive harm.
Hide quick links:
Advertisement
Table of Contents
