Operating Techniques - Husqvarna 325 LX Operator's Manual

Operating Techniques

Operate the Clean Sweep at or near
full throttle with its sweeper fins
resting on the work surface.
IMPORTANT!
It is both tiring and unnecessary to lift
or hold the fins from the work surface
during sweeping.
When sweeping narrow areas such
as sidewalks, the Clean Sweep can be
used to throw material directly ahead
of the operator. Clearing wider areas
may require sweeping at an angle to
create windrows to one side of the
path being cleared.
Windrows of lighter materials often
can be combined into one main row or
pile for eventual pickup, while heavy
or bulky material may need to be
collected row-by-row.
To pull debris from corners,
reverse sweeper drum rotation by
turning the powerhead over (throttle
facing "up").
Reversing the Clean Sweep will
cause debris to be thrown back
toward the operator. When
reversing the Clean Sweep, use
lower throttle settings and
beware that thrown debris may
also affect your footing!
WARNING!
4
Sweeping
corners with the
PowerBroom
upside down
DIRECTION OF
ROTATION