Kenmore 721.63662 Use & Care Manual page 35

GLASS TRAY
PROBLEM CAUSE
The glass tray will not • The glass tray is not correctly in place. It should be correct-side up and sitting
move. firmly on the center hub.
• The support is not operating correctly. Remove the glass tray and restart the
oven. If the hub still does not move, call Sears Service at 1-800-4-MY-HOME®.
Cooking without the glass tray can give you poor results.
TONES
PROBLEM CAUSE
You do not hear • You have not entered the correct command.
the programming or
end-of-cycle tone.
DISPLAY MESSAGES
I
PROBLEM CAUSE
The display is flashing" : ." • There has been a power interruption. Reset the clock. (See the "Clock" section
on Page 12.)
If none of these items are causing your problem, call Sears Service at 1-800-4-MY-HOME®.
I
35