Selecting The Installation Location; Installation Diagram; Installing The Indoor Unit; Warning - Mitsubishi Electric Mr.Slim SLZ-KA09 Installation Manual

2. Selecting the installation location

2.1. Indoor unit
• Where airflow is not blocked.
• Where cool air spreads over the entire room.
• Where it is not exposed to direct sunshine.
• At a distance 1 m, 3 ft or more away from your TV and radio (to prevent picture
from being distorted or noise from being generated).
• In a place as far away as possible from fluorescent and incandescent lights (so
the infrared remote control can operate the air conditioner normally).
• Where the air filter can be removed and replaced easily.

3. Installation diagram

Fig. 3-1

4. Installing the indoor unit

Fig. 4-1

Warning:

Mount the indoor unit into a ceiling strong enough to withstand the weight of
the unit.
(inch) 3.1. Indoor unit (Fig. 3-1)
Ceiling
Grille
Obstacle
Min. 1000 mm, 40 inch
Min. 500 mm, 20 inch (Entire periphery)
If setting the maintenance space for
Warning:
Mount the indoor unit on a ceiling strong enough to withstand the weight of
the unit.
3.2. Outdoor unit
Refer to the outdoor unit installation manual.
4.1. Check the indoor unit accessories (Fig. 4-1)
The indoor unit should be supplied with the following accessories.
Installation template
Washers (with insulation)
Washers (without insulation)
Pipe cover (for refrigerant piping joint)
small diameter (liquid)
large diameter (gas)
Band (large)
Band (small)
Screw with washer (M5 × 25) for mounting grille
Drain socket
Insulation
, be sure to leave is a minimum of 700 mm, 28 inch.
Accessory name Q'ty
1
4
4
1
1
6
2
4
1
1
3