Table of Contents
Advertisement
Advance Operations
ON Screen Display information
When the player is under operation, press OSD
button continuously on the remote control, the screen
will display sequently parts of information, all
information and clear information.
DVD
TT
0/55
CH
0/2
00:00:26
Press once more,it will show
......
1/1
5.1CH
OFF
OFF
Press OSD button again, the screen display will be cleared.
Program Play
The player plays the tracks in the disc in an order
you desired.
1.Press PROGRAM button and the screen will
display the program menu.
2.
Press navigation buttons to choose memory index
and then press the desired Titles/Chapters number by
using the numeric buttons. The selected Titles and
Chapters are stored into the memory. Up to 16
memories can be stored.
Note: Leading zero is not necessary.If the track
number is more than 10, press the +10 key first
and then the unit digit.
Examples:
Track 3, press "3"
Track12, press "+10" then "2"
Track21, press "+10" twice then "1"
3. To start program play , select PLAY on
The menu or select STOP button to exit
Without program play.
4. To clear programmed items, scroll the
navigation button to the items to be cleared
and press CLEAR button on the remote
control, the selected items will be deleted.
Repeat Play
Press REPEAT button during play, it will repeat
play one chapter one title (for DVD), or
repeat play track (forVCD/CD).
For DVD disc
CHAPTER
Repeat chapter
TITLE
Repeat Title
For VCD/CD disc In the PBC OFF mode
(
)
REP (off)
Repeat off
REPrep1
(
)
Repeat 1 track
REP (rep all)
Repeat All tracks
A-B Repeat play
Repeating sections between two specified
Points (A-B repeat)
1. Press A-B button during play at the point
where repeat play is to be started (A).
2. Press A-B button at the point where repeat
play is to be ended (B). Repeat play of the
3. Press A-B button to return to normal play.
10
Remote control unit preparation
Service life of batteries
The batteries normally last for about one year although this
depends on how often, and for what operations, the remote
control unit is used.
If the remote control unit fails to work even when it is
operated near the player, replace the batteries use 2 size
AAA batteries.
Note:
Do not use rechargeable (Ni-Cd) batteries
Do not attempt to recharge, short-circuit,
Disassemble, heat or throw the batteries into the fire.
Do not drop, step on or otherwise impact the remote
control unit. This may damage the parts or lead to
Malfunction.
Do not mix old and new batteries.
If the remote control unit is not going to be used for a
long time, remove the batteries. Otherwise,
Electrolyte may leak which may lead not only to
malfunction but also to burns ifcontact is made with
the electrolyte.
Wipe away any electrolyte leaking inside the remote
control unit, and install new batteries.
If any electrolyte should come into contact with parts
of your body, wash it off thoroughly with water .
Remote control operatio range A
Point the remote control unit from no more than about 3-4 m
from the remote control sensor and within about 60° of the
front of the player.
The operating distance may vary according to the brightness
of the room.
Note:
Do not point bring lights at the remote control sensor.
Do not place objects between the remote control unit and the
remote control sensor.
Do not use this remote control unit while simultaneously
operating the remote control unit of anay other equipment.
A
REMOTE SENSOR
3-4m
30
30
7
Advertisement
Table of Contents
