Cutting Tips - Husqvarna Rider Pro 15 Operator's Manual

Husqvarna lawn tractor operator's manual
Hide thumbs Also See for Rider Pro 15:
Table of Contents

Advertisement

3. Push in the lock button on the lift lever and lower
down the cutting unit.
4. Select the required cutting height (1–9) with the
cutting height lever.

Cutting tips

Localise and mark stones and other fixed objects
to avoid collision.
Start with a high cutting height and reduce down
until the required mowing results are obtained.
The mowing results are best with a high engine
speed (fast rotating blades) and low driving
speed (slow moving machine). If the grass is not
too high and thick the driving speed can be
increased or the engine speed reduced without
noticeably affecting the mowing results.
Mowing pattern
DRIVING
The best lawns are achieved if the grass is cut
often. Mowing becomes more uniform and the
grass cuttings become more evenly distributed
over the surface.
The total time consumption is not greater since it
is possible to select a higher driving speed
without inferior mowing results.
Avoid mowing a wet lawn. The mowing results
are inferior since the wheels sink down into the
soft lawn.
Hose down the cutting unit with water
underneath each time it is used. Put the cutting
unit in the service position first.
If you use the BioClip unit it is important to mow
the grass regularly.
WARNING!
Clear the lawn from stones and
other objects which can be
thrown out by the blades.
17
English –

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents