Blade switch
To engage the mower deck, pull the blade switch knob
out. The mower blades are disengaged when the knob
is pressed down fully.
Ignition Switch
The ignition key is placed on the control panel and is
used to start and stop the engine.
WARNING!
Do not run the starter for more
than fi ve seconds each time. If
the engine does not start, wait
10 seconds before retrying.
Fuses
The fuses are located in a holder to the left of the
hydraulic tank. They are fl at pin fuses of the same type
used in automobiles.
There are three fuses as well as a socket for one
spare fuse.
Fuse ratings and functions:
• 20 A, Primary fuse.
• 7.5 A, Mower deck coupling.
• 7.5 A, Accessory outlet.
• Socket for spare fuse.
CONTROLS
Blade Switch
Ignition Switch
Fuses
8011-510
8011-748
8011-746
21
-
English