Folding Bench For Storage - York Fitness 540 Owner's Manual

Folding Bench for storage

To fold up the bench:
1. Remove the incline adjustable post.
2. The back upholstery will then rest freely on the main frame.
3. Loosen and remove the 2 x male hand-wheels
4. Remove the female hand-wheel and the bolt at the front of the bench.
(WARNING: Ensure unsecured front leg is held in position.)
5. Carefully fold the bench until it has moved 90 degrees (See picture below).
6. Replace the incline and adjustable post in the 2nd brackets from bottom to secure.
To fold down the bench:
1. Ensure that the front foot is being held securely in one hand.
2. Remove the incline adjustable post.
3. Carefully fold the bench down until the front leg is flat on the floor.
4. Insert the bolt and female hand-wheel to fix the front leg into place.
5. Insert and tighten the 2 x male hand-wheels at the base of the uprights.
INCLINE ADJUSTABLE POST
BACK UPHOLSTERY
FEMALE
HAND-WHEEL
18
Hold front leg
securely when
folding bench
down
Incline adjustable
post locks bench
into position
MALE HAND-WHEEL
www.yorkfitness.com
The leg unit should only
be folded up like this if it
is secured by on other means
(eg in between cupboards etc)