Tail/Brake Light; Replacing A Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha YZF-R1C Owner's Manual

Tail/brake light

This model is equipped with an LED
type of tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24180
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
EAU24201
Replacing the license plate
light bulb
1. Remove the license plate light unit
1. Screw
2. License plate light unit
2. Remove the socket (together with
ECA11190
1. License plate light bulb
6-37
by removing the screws.
the bulb) by pulling it out.
EAU24310
6