Blade Switch; Blade-Switch; Ignition Switch; Ignition Switch - Husqvarna iZ4217TSKAA/9689999254 Operator's Manual

Iz series rider
Table of Contents

Advertisement

5. Blade switch

In order to engage the mower deck, pull the
knob out; the mower blades are disengaged
when the knob is depressed.

6. Ignition Switch

The ignition key is placed in the ignition
switch on the driver's panel and is used to
start and stop the engine.
IMPORTANT INFORMATION
Do not run the starter for more than five
seconds each time. If the engine does not
start, wait about 10 seconds before re-
trying.

7. Fuses

The fuses are located in a holder to the left of
the hydraulic tank. They are flat pin fuses of
the same type used in automobiles.
There are three fuses, as well as socket for
one spare fuse.
Fuse ratings and functions:
20 A, Primary fuse.
7.5 A, Mower deck coupling.
7.5.A, Accessory outlet.
Socket for spare fuse.
CONTROLS
Blade Switch
Ignition key and hour meter

Fuses

8011-510
8011-521
8011-443
19
English-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents