Page 3
Flight Joystick 1. DESCRIPTION Aggressor Flight Joystick can be used in di erent games such as simulators, arcades, shooter games etc. This device supports Windows XP/Vista/7/8 and requires DirectX 7.0 and up. Drivers are not needed for operating this device, however, their installation is necessary for activating vibration feedback.
Page 4
Aggressor Operation Manual 6. DESCRIPTION OF THE ONSTRUCTION a D-Pad b Buttons 3–6 c Button 2 d Handle e Buttons 7–12 f Hand throttle control g Button 1 h USB cable i On/O VIBRATION switch j Rubber suction caps Fig. 1. Front view VIBRATION Fig.
Page 5
Flight Joystick 7. CONNECTION AND INSTALLATION • Install the device on an even surface on its suc- tion caps j. • Connect the device to an available USB port of the PC via the built-in USB cable h. When con- necting to your PC, the device is automatically detected as a game controller and is fully ready for use.
Page 6
Aggressor Operation Manual • Hand throttle control. Shift the hand throttle control f to the left or right, the corresponding block of Z axis will shift simultaneously. Z axis scale will gradually ll with green color. • D-Pad. Revolve the D-pad a in di erent...
Page 7
Flight Joystick • Vibration feedback function. Enter Vibration tab (Fig. 7) to test vibration feedback function. Fluctuating and swaying action of the ight joystick corresponds to motor vibration; period (Period) and range (Mag.) of vibration can be adjusted during vibration test. In the center there is a eld that shows shifting of joystick handle with vibration.
Page 8
, 427447. « », 48310, , 15. Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road, 02-02, Singapore, 427447. Produced under the control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie, Kotka, Finland, 48310. Made in China. ® Registered Trademark of Oy SVEN...
Need help?
Do you have a question about the Aggressor and is the answer not in the manual?
Questions and answers