Husqvarna GTH2548XP Owner's Manual page 12

KNOW YOUR TRACTOR
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR.
Compare the illustrations with your tractor to familiarize yourself with the location of various controls and adjustments.
Save this man ual for future reference.
THROTTLE
CONTROL
BRAKE PEDAL
MOTION DRIVE
BELT TENSION
HANDLE
FREE WHEEL CONTROL
Our tractors conform to the safety standards of the American National Standards Institute.
ATTACHMENT CLUTCH SWITCH - Used to engage mow er
blades or other attachments mounted to your trac tor.
LIFT LEVER - Used to raise and lower mower deck or
other attachments mounted to your tractor.
LIFT LEVER PLUNGER - Used to release attachment lift
lever when changing its position.
BRAKE PEDAL - Used for braking the tractor and starting
the engine.
MOTION CONTROL LEVER- Selects the speed and direc-
tion of tractor.
CHOKE CONTROL - Used when starting a cold engine.
AMMETER - Indocates charging (+) or discharging (-) of
battery.
LIGHT SWITCH POSITION - Turns the headlights on
and off.
OPERATION
LIGHT SWITCH
HOURMETER
AMMETER
TECH
HEIGHT
ADJUSTMENT
KNOB
0
60
60
AMPS
CHOKE
CONTROL
PARKING BRAKE
LEVER
FIG. 7
THROTTLE CONTROL - Used to control engine speed.
FREEWHEEL CONTROL - Disengages transmission for
pushing or slowly towing the tractor with the engine off.
IGNITION SWITCH - Used to start and stop the engine.
HOURMETER - Indicates hours of operation.
PARKING BRAKE LEVER - Locks brake pedal into the
brake position.
HEIGHT ADJUSTMENT KNOB - Used to adjust the mow er
height.
MOTION DRIVE BELT TENSION HANDLE- Used when
changing motion drive belt and, if necessary, starting engine
under extremely cold conditions.
12
LIFT LEVER
PLUNGER
LIFT LEVER
ATTACHMENT
CLUTCH SWITCH
IGNITION SWITCH
MOTION
CONTROL
LEVER
02711