Program Table; Sound System - Sanyo CE19LD08-B Instruction Manual

Program
Press " " or " " button to select Program. Use " "
or " " button to select the program number. You can
also enter a number using the numeric buttons on the
remote control. There are 200 programme storage
between 0 and 199.
Band
Band can be selected either C or S. Press " " or "
" button to set Band.
Channel
Channel can be changed by " " or " " button or
numeric buttons.
Colour System
Press " " or " " button to select Colour System.
Use " " or " " button to change the colour system to
AUTO, PAL, SECAM or PAL60.

Sound System

Press " " or " " button to select Sound System.
Press " " or " " button to change the sound system
to BG,DK, I, L or L'.
Fine Tune
Press " " or " " button to select Fine Tune. Press "
" or " " button to adjust the tuning.
Search
Press " " or " " button to select Search. Use " "
or " " button to start programme searching. You can
also enter the desired frequency using the numeric
buttons while Search item is highlighted.
Store
Press " " or " " button to select Store. Press " "
or OK button to store the settings. "Stored..." will be
displayed on the screen.
Install Menu in AV Modes
The following screen appears in the install menu when
the TV is in AV modes. Note that limited options will
be available. Switch to TV mode for viewing complete
version of the Install menu.
Colour System
Press " " or " " button to select Colour System.
Use " " or " " button to change the colour system to
01_MB45_[GB]_3920UK_UKIDTV_NICKEL9_19908W_10068907_50168569.indd 23 01_MB45_[GB]_3920UK_UKIDTV_NICKEL9_19908W_10068907_50168569.indd 23
AUTO, PAL, SECAM, PAL60, NTSC 4,43 or NTSC
3,58.
Store
Press " " or " " button to select Store. Press " " or
"OK" button to store the settings. "Stored..." will be
displayed on the screen.

Program Table

Select Program Table by pressing " " or "
Press " " to display Program Table:
By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except for the
AV modes). By cursor action, programme selection is
done automatically.
Name
To change the name of a programme, select the
programme and press the RED button.
The fi rst letter of the selected name will be highlighted.
Press " " or " " button to change that letter and " "
or " " button to select the other letters. By pressing
the RED button, you can store the name.
Move
Select the programme which you want to move by
navigation buttons. Press the GREEN button. By
navigation buttons move the selected programme to
the decided programme space and press the GREEN
button again.
Delete
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the
selected programme from the programme list, and
the following programmes shift one line up.
APS (Auto Programming System)
When you press the BLUE button for starting
automatic tuning, Auto Programming System menu
will appear on the screen:
English - 23 -
button.
20.07.2010 10:36:36 20.07.2010 10:36:36