Front Wheel Mount; Front Wheel Bearings; Deck Spindle - Husqvarna EZ4824 / 965880401 Operator's Manual

Front Wheel Mount

lubricate with a grease gun, one zerk for each wheel
mount, until the grease is forced out.
Use only good quality bearing grease.
Grease from well-known brand names (petrochemical
companies) usually maintains a good quality.

Front Wheel Bearings

lubricate with a grease gun, one zerk for each set of
wheel bearings, until the grease is forced out.
Use only good quality bearing grease.
IMPORTANT INFORMATION
Use minimal lubrication and remove
excess lubricant so that is does not come
into contact with belts or belt pulley drive
surfaces.

Deck Spindle

lower the cutting deck completely.
If a grease gun without a rubber hose is used, the foot
plate must be removed.
lubricate with a grease gun, one zerk, 2-3 strokes.
Use only good quality bearing grease.
Deck Outer Spindle
Through the access hole in the belt shield, lubricate
outer deck spindles zerk, using a grease gun and
2-3 strokes per side. Use only good quality bearing
grease.
50
-Husqvarna
lUBRICATION
Lubricating the front wheels
Deck spindle
Deck outer spindle
8011-731
8011-732
8061-035