Fuel Shut Off Valve; Cutting Height Adjuster - Husqvarna EZ4824 / 965880401 Operator's Manual

Fuel Shut Off Valve

The fuel shut off valve is located at the left rear of the
seat. The valve is off when the handle tab is turned
perpendicular to the fuel line.

Cutting Height Adjuster

The deck cutting height is obtained by pressing the
button and moving the lever forward to the correct
cutting height on the cutting plate. The cutting height
range is from 1½" (38mm) to 4" (102mm) in ½ (13mm)
increments. The heights are measured from the
ground up to the blade tip with the engine not running.
IMPORTANT INFORMATION
In order to obtain an even cutting height, it is
important that the air pressure in all tires is 15
psi / 103 kPa / 1 bar.
IMPORTANT INFORMATION
Always raise the deck to the highest position
for transport.
22
-Husqvarna
CONTROlS
Fuel shut off valve in the CLOSED position
The mower deck's lifting lever
8011-419
8058-019