Dell PowerEdge M1000e User Manual page 67

Port Mapping of Quarter Height blades to
two IOMs with 16 Internal Ports on Fabric A:
No LOM Port Redundancy
IOM ports mapped to quarter height blade slots
Slot1a Slot2a Slot3a
A1 P1 A1 P2 A1 P3
Slot1b Slot2b Slot3b
A2 P1 A2 P2 A2 P3
Slot1c Slot2c Slot3c
A1 P9 A1 P10 A1 P11 A1 P12
Slot1d Slot2d Slot3d
A2 P9 A2 P10 A2 P11 A2 P12
Slot4a Slot5a Slot6a
A1 P4 A1 P5 A1 P6
Slot4b Slot5b Slot6b
A2 P4 A2 P5 A2 P6
Slot4c Slot5c Slot6c
A1 P13 A1 P14
Slot4d Slot5d Slot6d
A2 P13 A2 P14
On fabric A, two IOMs with
•
16 internal ports provide
connectivity to one port of
Slot7a Slot8a
the LOM on each quarter
A1 P7 A1 P8 height blade.
Connectivity but not
•
redundancy (only 1 LOM port
per blade is connected)
Slot7b Slot8b
A2 P7 A2 P8
Slot7c Slot8c
A1 P15 A1 P16
Slot7d Slot8d
A2 P15 A2 P16
IOM A1 and A2
A1 A2