Removing The Pedestal Stand - Toshiba 22BL712G DIGITAL Series Owner's Manual

Digital series

Table of Contents

When using a Wall Bracket

Please use a wall bracket appropriate for the size and weight of the LCD TV.

•

Two people are required for installation.

•

To install a wall-mount from another manufacturer.

(1) Unplug and remove any cables and/or other component connectors from the rear of the TV.

(2) Carefully lay the front of the unit face down on a ﬂ at, cushioned surface such as a quilt or blanket.

(3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate

bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the

wall bracket.

(4) Always use the screws supplied or recommended by the wall mount manufacturer.

Note :

•

• The bracket shown above is a sample image. The bracket and ﬁ xings are not supplied with the TV.

Removing the pedestal stand

(1) Carefully lay the front of the unit face down on a ﬂ at, cushioned surface with the stand hanging over the edge.

(2) Remove the screws.

(3) After the screws are removed, hold the pedestal stand in place,then remove the pedestal stand and the plastic moulding

from the TV by removing away from the TV.

NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.

01_MB62_[GB]_DVB_TC_(IB_INTERNET)_(22145LED_3910UK)_BRONZE19_10081092_10079982.indd 7

Removing the pedestal stand

For 22BL712G model

English - 7 -

13.10.2012 14:25:16

Table of Contents

Show Quick Links

Table of Contents