Shortcuts; Program - Husqvarna Auto Mower Operator's Manual

Shortcuts

1. Home:
• Sends the mower to the charging station. Where
it stays until the button is pressed again.
The house icon is lit on the right-hand side of the
display when the button is pressed.
• Move the cursor in the menu structure back to
the main page.
2. Operating mode:
The selected operating mode is shown on the
right-hand side of the display as AUTO respective
MAN.
Press the button to choose between:
• AUTO, the normal automatic operating mode
where Auto Mower mows and charges continu-
ously.
• MAN. If you select MAN and close the control
panel cover when the Auto Mower is on the
lawn, it will mow until the battery is discharged. It
will then stop and show the message "Battery
empty". The mower must then be moved manu-
ally to the charging station and then started
manually after charging.
If you select MAN and close the control panel
cover when the Auto Mower is in the charging
station the mower will charge completely,
reverse 20 centimetres and stop.

Program

3. A
4. B
5. C
Under the program buttons you can save sets of differ-
ent settings, to reuse or to simplify the use of an Auto
Mower in several gardens. Under respective buttons
are some preset settings. You can choose to use these
or change them.
• To change settings: Make the required settings.
Save by holding down the selected button for 2 sec-
onds, until two beeps are heard close together. If,
for example, button A is pressed the message "Pro-
gram A changed" will be shown for 2 seconds on
the display.
• Use the saved information by quickly pressing the
required button.
If, for example, button A is pressed the question
"Use program A?" will appear on the display. If YES
is pressed, the message "Program A selected" will
be shown for 2 seconds on the display. The letter
"A" is then shown on the right-hand side of the dis-
play to indicate which program is selected.
CONTROL PANEL
1
2
3012-240
3
4
5
3012-241
27
English-