Cleaning & Maintenance - NewAir AI-215 Series Owners Manual & Instruction Manual

ZERO and disappears, the unit will start to run automatically according
to your settings.
To cancel when the time is set but not yet running, press the TIMER button two
times to cancel it.
How to Set the OFF-TIMER Program
When the unit is on, program the OFF-TIMER to stop the unit after a set time.
1. Press the TIMER button on the control panel. "1.0H" will flash in the
Timer Set Display Window.
2. Press the SELECT button to set the Timer delay to a time between 1.0
and 18.0 hours, in half hour increments.
3. After the desired time is set, the display will show the time remaining
and will decrease in 0.1 hour increments. When the timer reaches
ZERO and disappears, the unit will stop running automatically.
To cancel while the unit is running, press the TIMER button two times to cancel
the TIMER-OFF setting.
CLEANING & MAINTENANCE
Clean the outside of the ice maker with a mild detergent solution and warm
water. Use a soft cloth to wipe to avoid scratching or damaging the surface of
the unit.
Use the unit's self-clean function to clean the interior of the unit:
1. Remove the ice basket.
2. Add 1:1 mixture of water and vinegar.
3. Plug in the unit. Hold down the CLEAN button for at least 6 seconds and
release. The unit will automatically enter the self-clean program. This
process will last about 5-6 minutes, after which the unit will automatically
power down again. During this process the "Add Water Indicator" and the
"Self Cleaning Indicator" will light in the LCD display window, and the fan
blades in the self-clean symbol will always rotate. This process will rinse
the inside parts of the ice maker thoroughly.
NEWAIR AI-215 SERIES PORTABLE ICE MAKER
8