System Settings; Switching The Auxiliary Setting; Setting Av Input; Setting The Navigation System - Pioneer AVH-X5650BT Owner's Manual

Section
19

System settings

Switching the auxiliary setting

Activate this setting when using an auxiliary de-
vice connected to this unit.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the system
menu.
3 Touch AUX Input on the system menu to
turn AUX Input on or off.

Setting AV input

Activate this setting when using an external
video component connected to this unit.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the system
menu.
3 Touch AV Input on the system menu to
turn AV Input on or off.

Setting the navigation system

Activate this setting when connecting a Pioneer
Add-on Navigation system (sold separately).
Device connection can be set when all of the
following conditions are met.
— The iPhone is not connected.
— No Bluetooth connection.
— The source is turned off.
1 Turn the source off.
Refer to Source off key on page 6.
2 Press the home button to switch to the
home display.
34
En
3 Touch the system key to open the system
menu.
4 Touch Device connection on the system
menu.
5 Touch NAVI to select.
NAVI – Navigation system

Selecting MirrorLink Mode

You can select the MirrorLink Mode setting
whether you use third party applications in your
smartphone or not.
1 Press the home button to switch to the
home display.
2 Touch the system key to open the system
menu.
3 Touch the desired setting next to
CD-ML100 Setting.
! Car Mode – You can use the launcher appli-
cations in your smartphone on the unit's
screen.
! App List Mode – You can use the third party
applications in your smartphone on the unit's
screen.
Updating the firmware for
the smartphone link adaptor
This function is used to update the smartphone
link adaptor firmware with the latest firmware.
For about smartphone link adaptor firmware
and updating, refer to our website.
You can update only when smartphone link
adaptor is available.
System settings
Important
! The USB storage device for updating must
contain only the correct update file. If the
USB storage device contains multiple files,
the update will fail.
! Never turn the unit off and never disconnect
the USB storage device while the firmware is
being updated.
! You can only start the firmware update when
the vehicle is stopped and the parking brake
is engaged.
1 Downloading the firmware update files.
2 Connect a blank (formatted) USB storage
device to your computer, and then locate
and copy the correct update file onto the
USB storage device.
3 Turn the source off.
Refer to Turning the source ON/OFF on page 6.
4 Press the home button to switch to the
home display.
5 Touch the system key to open the system
menu.
6 Touch CD-ML100 Update on the system
menu.
7 Connect the USB storage device to the
smartphone link adaptor.
Refer to Connection for updating Smartphone
link adaptor firmware on page 48.
8 Touch Continue to display the update
mode.
Follow the on-screen instructions to finish up-
dating the smartphone link adaptor.
9 Remove the USB storage device from the
smartphone link adaptor.
10 Turn the ignition switch OFF and then to
ACC or ON.
Notes
! If update failed, please consult your dealer or
the nearest authorized PIONEER Service Sta-
tion.
! You cannot update while connected to
Bluetooth.
Displaying the smartphone
link adaptor firmware version
If smartphone link adaptor fails to operate prop-
erly, you may need to consult your dealer for re-
pair. In such cases, you may be asked to specify
the firmware version. Perform the following pro-
cedure to check the version on smartphone link
adaptor.
1 Turn the source off.
Refer to Turning the source ON/OFF on page 6.
2 Press the home button to switch to the
home display.
3 Touch the system key to open the system
menu.
4 Touch CD-ML100 Firmware Info to display
to the version of the firmware of smart-
phone link adaptor.

Updating firmware

This function is used to update this unit with the
latest firmware.
For about firmware and updating, refer to our
website.