Table of Contents
Advertisement
GENERAL REC OMMENDA TIONS
The warranty on this snow thrower does not cover items that
have been sub jected to operator abuse or negligence. To
receive full value from the warranty, operator must maintain
snow thrower as in structed in this manual. Some ad just-
ments will need to be made periodically to properly maintain
your snow thrower.
At least once a season, check to see if you should make
any of the adjustments described in the Service and Ad-
justments section of this manual.
•
At least once a year, you should replace the spark plug
and check belts for wear. A new spark plug will help
your engine run better and last longer.
•
Follow the maintenance schedule in this manual.
NOTE: Use only Original Equipment Manufacturer (OEM)
parts to service this unit. Failure to do so can cause the unit
to malfunction and pose a risk of injury to the operator.
BEFORE EACH USE
1. Check engine oil level.
2. Check for loose fasteners.
3. Check controls to be sure they are functioning properly.
LUBRICATION
Keep your snow thrower well lubricated
(See "LU BRICA TION CHART").
SNOW THROWER
Always observe the safety rules when performing any
maintenance.
TIRES
•
Maintain proper air pressure in both tires (14–17
PSI).
MAINTENANCE
1 SAE 30 Motor Oil
2 See "ENGINE" in
Maintenance section
1 Pivot points
2 Engine oil
•
NOTE: To seal tire punctures and prevent fl at tires due to
slow leaks, tire sealant may be purchased from your local
parts dealer. Tire sealant also prevents tire dry rot and
corrosion.
14
LUBRICATION CHART
Keep tires free of gasoline and oil, which can harm
rubber.
Advertisement
Table of Contents
