Input/Output Signals - Hitachi Kokusai Electric HV-D27A Operation Manual

Input/Output Signals

1. Input signal
(1) Genlock input
･VBS 1.0 Vp-p +/- 3 dB or black burst, 75 ohm or high impedance (BNC)
･HD/VD TTL level (TRIG connector)
(2) Serial data (4 pin connector)
･1.5 Vp-p +/- 3 dB, high impedance (in connection with RC-Z3)
･RS-232C level (in connection with personal computer)
Set internal switch according to connected equipment.
Note:
(3) Trigger input TTL level(L:0 to 0.4 VDC H:3.4 to 5.0 VDC)
2. Output signal ratings
(1) Composite video (BNC, D-sub connector)
VBS 1.0 Vp-p/ 75 ohm
(2) Y/C (D-sub, Y/C connectors)
Y : 1.0 Vp-p/ 75 ohm
C : 0.28 Vp-p (burst)/ 75 ohm (NTSC),
(3) Component (D-sub connector)
Y : 1.0 Vp-p/ 75 ohm
R-Y: 0.7 Vp-p/ 75 ohm
B-Y: 0.7 Vp-p/ 75 ohm
(Sync 0.3 +/- 0.1 Vp-p, burst 0.3 +/- 0.1 Vp-p)
0.3 Vp-p (burst)/ 75 ohm (PAL)
65