Introduction; Advanced Features - AEG 80 / 120 kVA Operating Instructions Manual

1. Introduction

AEG Protect 3.M 2.0 Series UPS is designed for large-scale power systems applied in
data center, communication, networking, medical, safety and emergency systems and
all factory facilities.
With innovative PFC design and IGBT architecture, the Protect 3.M 2.0 Series
features high efficiency, low iTHD, low noise and high reliability.
The Protect 3.M 2.0 Series has a modular structure and hot-swappable function to
easily perform maintenance and reduce the MTTR (Mean Time to Repair).
The manual is valid for both models (80/120kVA). The drawings show the 80kVA
model if not different from the 120kVA UPS.

1-1 Advanced Features


Power Rating: 20/40/60/80 kVA or 20/40/60/80/100/120
kVA.

Up to 4/6 modules work in parallel in the single cabinet.

N+x parallel redundancy and expansion (Up to 4/6 units).
No need any extra parallel control card.

High input power factor(pf > 0.99) and low input current
(THDI: < 5%) for installation cost savings and utility
pollution reduction.

Overall high efficiency up to 94,5% with modular structure
and hot-swappable function for operation cost savings.

Dual input – separated rectifier and bypass input.

Built-in manual and static bypass switch for maintenance.

Built-in SRAM, record up to 500 real-time event logs.

Redundant auxiliary power and control circuit. Double
insurance of performing reliability.

Scheduled battery test and battery replacement warning.

Local and remote emergency power off function (LEPO
and REPO).

Compatible with generator design.

Double conversion and IGBT technology.

Multi-interface monitoring and controlling.

User-friendly LCD display and LED indicators.

External battery pack. Limitation of autonomy time
only by capacity of the batteries.
1-1