Transporting; Before Loading; Loading And Unloading - Honda F220 Owner's Manual

TRANSPORTING

BEFORE LOADING

If the engine has been running, allow it to cool for at least 15 minutes before
loading the tiller on the transport vehicle. A hot engine and exhaust system
can burn you and can ignite some materials.
Always turn the engine switch to the OFF position. Make sure to turn the fuel
valve OFF.

LOADING AND UNLOADING

If a suitable loading ramp is not available, two people should lift the tiller on
and off the transport vehicle while holding the tiller level.
Position the tiller so it sits flat on the bed of the transport vehicle. Tie the tiller
down with rope or straps. Keep the tie-down rope or straps away from the
controls, adjustment levers, cables, and the carburetor.
The handlebar can be folded either front or back so the tiller will take up less
space (see page 19).
Fold to the back side. Fold to the front side.
45