Table of Contents
Advertisement
OPERATION
BRUSH POSITION
3-3
HOW IT OPERATES
This machine is a portable, easy to use wide area
vacuum designed for use indoors, in a commercial or
light industrial environment.
When operating as a carpet vacuum, soil is lifted
from the carpet surface by a rotating brush and
carried into a removable bag by the vacuum motors.
1. Large debris such as paper cups, plates, etc.,
should be picked up before starting the cleaning
process.
2. Plan your cleaning route to work away from the
electrical source. Move machine forward at a
steady pace.
CLEANING
1. Adjust handle to comfortable position at waist
level or higher.
2. Use your finger to depress the Vacuum switch at
the base of the handle to activate the vacuum.
3. To adjust brush height, move the Brush
Adjustment lever on the right side to the correct
setting for the carpet being vacuumed. Lower
brush gradually until firm brush contact is heard.
KEEP MACHINE MOVING WHILE BRUSH ENGAGED.
DAMAGE TO CARPET COULD OCCUR IF NOT
MOVING.
NOTE: Always return brush to storage position after
using machine.
4. Depress the brush lever at the handle to start the
brush.
5. Move forward at a steady pace for through
cleaning. Run machine more slowly over
extremely soiled areas.
6. Use the right side of the machine for edge
cleaning.
7. To use the accessory wand and detail tools,
depress the foot lever in the back of the machine.
8. To keep the vacuum operating at maximum
efficiency, check the dust bag regularly. Empty
when 1/2 to 3/4 full. Always use with disposable
paper bag for best results.
9. When finished vacuuming, coil the cable by hand
by looping into about a 3 foot diameter, Hang
coiled cable over handle. Wrap the end around
the cable loop to secure.
10.
Return brush to storage position.
86309230 CV71/2 02/19/08
Advertisement
Table of Contents
