Advertisement
INTENDED UsE
This charger is only intended to charge Ryobi battery pack
BPL3626, see specification table for details.
sAfETY INsTRUCTIONs
This appliance is not intended for use by persons
(including children) who may not be completely capable,
or who may lack experience, knowledge and common
sense necessary to operate the appliance safely. Children
should be supervised to ensure that they do not play with
the appliance.
When using the battery charger, the following basic
safety precautions should be observed for protection
against electric shock, danger of injury and burns.
Please read and observe these instructions before using
the device.
„ This charger is only to be used indoor under dry
conditions.
„ This charger is not intended to charge any other type
of battery and should never be used in explosive or
inflammable environments.
„ Non-rechargeable batteries cannot be charged with
this battery charger.
„ To protect against the risk of electrical shock, do not
immerse the unit, cord or plug in water or other liquid.
„ Before using the device check that the mains cable
and mains plug are not damaged.
„ The device must not be damp, and it should not be
used in a damp environment.
„ Do not use the device if it has suffered any heavy
shock or jolting, or is damaged in any other way.
„ Due to the heat generated during charging, the battery
charger should not be operated on a combustible
surface/in an inflammable environment.
„ Do not cover the ventilating slits.
„ Never disassemble the device yourself. Danger of
an electric shock or fire could be caused by improper
reassembly.
„ When the appliance is not in use and before cleaning
and maintenance, unplug the appliance from the
outlet.
„ During charging, the battery pack with charger must
be placed in a well ventilated area. Malfunction during
charging can be caused by storing and operating
in places where the temperature exceeds +40°C;
this should be avoided. Battery charging in closed
cupboards, near heat sources (radiators, bright
WARNING
English
sunshine) etc. causes heat to accumulate and can
damage the device.
„ If the battery is not going to be used for a long period,
pull the battery off the battery charger and pullout the
mains plug.
„ Protect battery contacts to avoid a short circuit caused
by a metallic object that can cause a fire or explosion!
„ Do not rivet or screw any name-plates or signs
onto the device. The protective insulation can
thereby be rendered ineffective. Adhesive labels are
recommended.
„ If the mains cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Do not insert any object into the ventilation slots or
charging connector. This can cause damage to the
appliance and may increase the risk of personal injury
and property damage.
Never allow the charger to be modified in any way
unless at an authorised service centre. This may
increase the risk of serious personal injury or property
damage.
Before you plug in your product, make sure that the
supply voltage used corresponds to that indicated on
the rating plate.
AssEMBLY
See Figure 4.
Insert the provided power cord into charger socket before
charging.
DEsCRIpTION
1. BCL3620 charger
2. Charger socket
3. Indicator LED
4. Battery port
5. "Key hole" hanger
6. Depress latches to remove battery pack
7. Power cord
2
WARNING
WARNING
WARNING
Advertisement
