Table Of Contents; List Of Contents - Husqvarna Edger Attachment Operator's Manual

Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
design and appearance of products without prior notice.
Read through the Operator's manual
carefully and understand the content before
using the machine.
These instructions supplement the instructions that were
included with the machine. For other procedures, please
refer to the opertaing instructions for hte machine.
!
WARNING!
Under no circumstances may the design of
the machine be modified without the
permission of the manufacturer. Always
use genuine accessories. Non authorised
modifications and/or accessories can result
in serious personal injury or the death of
the operator or others.
!
WARNING!
This accessory may only be used together
with the intended clearing saw/trimmer, see
under heading "Approved accessories" in
chapter Technical data in the machine's
Operator's Manual.
The machine is only designed for cutting the edges of lawns.
CONTENTS
EXPLANATION OF SYMBOLS
Symbols .............................................................................. 2
CONTENTS
List of Contents ................................................................... 3
SAFETY INSTRUCTIONS
Personal protective equipment ........................................... 4
The machine's safety equipment ........................................ 4
General safety instructions ................................................. 5
General working instructions ............................................... 5
Basic working techniques ................................................... 6
WHAT IS WHAT?
What is what on the edger attachment? ............................. 7
ASSEMBLY
Assembling the angle gear ................................................. 8
Assembling the blade .......................................................... 8
START AND STOP
Control before starting ........................................................ 8
MAINTENANCE
Angle gear ........................................................................... 9
Lubricating the flexible drive axle ........................................ 9
Adjusting the edger's cutting depth ..................................... 9
Maintenance schedule ........................................................ 9
TECHNICAL DATA
Technical data ..................................................................... 9

List of Contents

3
English -