Introduction - Husqvarna SMB 70, SMB 70 E Operator's Manual

Introduction

This operator's manual describes in detail how
the one-man sawmill is used and maintained and
how servicing is to be carried out. It also de-
scribes the measures to be taken for maximum
safety and how the safety features are designed
and function, as well as how they are inspected,
maintained, and repaired if necessary.
NOTE! The section dealing with safety must
be read and understood by all those who
install, use, or repair the sawmill.
The operator's manual comprises installation,
usage, and the different maintenance procedures
that can be performed by the operator. More
comprehensive servicing or troubleshooting
should be performed by the dealer's service
personnel.
The operator's manual describes all the requisite
safety features and should be read and under-
stood by the user before the sawmill is assem-
bled.
INTRODUCTION
Symbols and warning signs shown on the next
page can be found in this operator's manual and
on the one-man sawmill. If a decal on the sawmill
has been damaged or is worn, a new warning
decal must be applied as soon as possible in
order to ensure the greatest possible safety
when using the sawmill.
The one-man sawmill shall only be used to cut
boards and planks from logs.
The one-man sawmill should be used outdoors
and not in enclosed spaces.
3
English –