Table of Contents
Advertisement
5.
Select the Encryption Mode.
6.
In case a WEP key has been enabled, select ASCII
Mode or HEX Mode to enter the WEP Key.
7.
In case a WPA_PSK or WPA2_PSK key has been
enabled, select AES Mode or TKIP Mode to enter
the Encryption Key.
8.
Enter the Encryption key and press the [OK]
button.
Encryption key: Enter the Encryption key into the
WLAN connection device. Refer to your system
administrator to verify the Encryption key.
If no Encryption key is present, leave it blank and
press [OK].
9.
The telephone has been successfully registered.
45
Advertisement
Table of Contents
