Function Of Switch On Indoor Circuit Board; Dip Sw1 For Model Selection (Dip Sw1 Has Been Set At Factory); Dip Sw2 For Capacity Setting (Dip Sw2 Has Been Set At Factory); Dip Swe For Emergency Operation - Mitsubishi Electric PEH-RP200MYA Technical & Service Manual

8

FUNCTION OF SWITCH ON INDOOR CIRCUIT BOARD

[1] DIP SW1 for model Selection (DIP SW1 has been set at factory)

ON
1 2 3
OFF
PEH-RP200MYB/RP250MYB : SW1-1, -4 ON, SW1-2, -3, -5 OFF

[2] DIP SW2 for Capacity Setting (DIP SW2 has been set at factory)

ON
1 2 3
OFF
PEH-RP200MYA : SW2-3, -5 ON, SW2-1, -2, -4 OFF

[3] DIP SWE for Emergency Operation

ON
OFF
When SWE is turned ON, FAN turns ON. Setting of emergency operation other than SWE is
performed at the outdoor unit. For a description of the specific emergency operation execution
method, refer to the outdoor unit
P250MYA) Technical & Service Manual.
4 5
4 5
(PUHZ-RP200YHA, PUHZ-RP250YHA, PUH-P200MYA, PUH-
ON
1 2 3 4
OFF
PEH-RP250MYA : SW2-2, -3, -5 ON, SW2-1, -4 OFF
- 25 -
5