Electrical Connection; Inserting The Batteries - Silvercrest SRD 250 A2 Operating Instructions Manual

■ The surfaces of furniture may contain components that can aff ect
GB
the rubber pads of the appliance and could soften them. If neces-
IE
sary, place a covering under the appliance's rubber pads.
■ The mains power socket must be easily accessible so that, in an
emergency, the plug can be quickly withdrawn from the socket.

Electrical connection

■ Before connecting the appliance compare the connection data
(Voltage and frequency) on the rating plate with that of the mains
electric source. This data must be compatible to avoid possible
damage to the appliance.
■ Make sure that the appliance's connection cable is not damaged
and is not laying over hot surfaces and/or sharp edges.
■ Make sure that the connection cable is not tightly stretched or bent.
■ Do not allow the connection cable to hang over edges
(Trip wire eff ect).

Inserting the batteries

By inserting two 1.5 V batteries (type R6/LR6/AA/Mignon) you
avoid losing the programmed time of day and wake time in the
event of mains power loss. The batteries make sure that the internal
clock continues to run even during a power outage.
When power is restored the correct time appears automatically
in the display
NOTICE
► The display, radio and alarm do not function with battery-
power alone.
10
Setting up and connecting
.
2
SRD 250 A2