Advertisement
Welcome
The Explorer
®
8540HDC™ and 8550HDC™ DVR Set-Top with a
Multi-Stream CableCARD™ (M-Card™) delivers high-deÞ nition
programming in exceptional picture and audio quality. The M-Card
provides system security and authorization of digital services.
Through these DVR set-tops, you can access interactive services,
such as video-on-demand and pay-per-view programs. Contact your
service provider for information about these and other available
services. Use the instructions in this guide to install the 8540HDC or
8550HDC and to access your program services.
Important! If the M-Card is removed, the set-top will not operate
correctly.
For more information about this product, visit our website:
www.scientiÞ catlanta.com/products/consumers/new_cableboxes.htm
Safety First
Before using this DVR read the IMPORTANT SAFETY
INSTRUCTIONS section of this guide.
Watch TV
Press the following remote control keys to access services and
programs:
• Guide–Display the on-screen program guide
• Arrows–Highlight a program in the schedule
• Info–Display program description
• Select–Watch a speciÞ c program in the guide
Avoid Screen Burn-In!
Images such as letterbox bars or side bars, bright closed-captioning
backgrounds, station logos, or any other stationary images may
cause the HDTV screen to age unevenly and cause damage to your
HDTV. Refer to the user's guide that came with your HDTV for more
information about screen burn-in.
Automatic Software Updates
A message appears on the TV screen when the DVR and the
M-Card module are receiving software updates. In addition,
download information appears on the front panel of the DVR during
these updates. Wait for the current time to appear on the front panel
before continuing. When the time appears, the update is complete.
Note: If you need further assistance, contact your service provider.
Performance Tips
If the DVR does not perform as expected, the following tips may help.
No picture
• Verify that the M-Card module is installed.
• Verify that the power to your TV is turned on.
• If the DVR is plugged into a wall switch, verify the switch is in the
ON position. (Avoid plugging into an outlet that is controlled by a
wall switch.)
• Verify that all cables are properly connected.
• The current channel may not be available in your service
package.
Try selecting another channel to see if a picture appears.
No color
• Verify that the HDTV is in HD mode. If necessary, re-run the
HDTV Setup Wizard to select HD mode.
• Verify the current TV program is broadcast in color.
• Adjust the TV color controls.
No sound
• If your setup includes a VCR or stereo, verify that you have
properly connected them to the DVR.
• Verify the volume is turned up.
• Verify the mute function is not on.
Explorer 8550HDC Front Panel
CH+
VOL-
VOL+
POWER
SELECT
CH-
GUIDE
INFO
EXIT
1
2
3
4
5
6
7
8 9 1011
1 Power
Turns the DVR on and off
2 USB
Connects to external USB devices (Reserved for future use)
3 VOL +, VOL -
Increases and decreases the volume
4 CH+, CH -
Scrolls through the channels
5 Select
Accesses your on-screen selection
6 IR Sensor
Receives the infrared signal from the remote control
7 LED Display
Displays the selected channel number and time of day. The LED also displays the following:
• Message (
)
• HDTV
• Power (
)
• Output Resolution (1080i, 720p, 480p, or 480i)
• AUTO - Automatically outputs native scan rates that your TV can accept
8 Guide
Accesses the on-screen guide, video-on-demand, or pay-per-view features
9 Info
Displays a description of the selected program. This button is available
from the on-screen guide and while viewing a program
10 Exit
Exits menus, the on-screen guide, and program information
11 List
Displays the Recorded List
12 Video and
Not available on all models. Connects to video and left/right (L/R) audio
Audio Input
outputs from a TV or other device. (Not available on 8540HDC)
Explorer 8550HDC Back Panel
OPTICAL
ARCHIVE
OUT 1
AUDIO
DIGITAL
VIDEO
VIDEO
Y
OUT
AUDIO
L
L
Pb
L
IR
THIS DEVICE IS INTENDED TO BE ATTACHED TO A
RECEIVER THAT IS NOT USED TO RECEIVE OVER-THE-AIR
R
R
Pr
R
BROADCAST SIGNALS. CONNECTION OF THIS DEVICE
IN ANY OTHER FASHION MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS
AND IS IN VIOLATION OF THE FCC RULES, PART 15.
S-VIDEO
SCIENTIFIC-ATLANTA, INC.
CABLE
CATV CONVERTER
OUT
IN
MADE IN MEXICO
1
2
3
4
5
6
7 8
9
11
10
1 Cable In
Connects to a coaxial cable that delivers the signal from your service provider
2 Set-Top Bar Code Label Contains set-top serial number and MAC addresses
3 Archive Video
Connects to a video input of an archive device
4 L-R Audio Archive
Connects to an audio input of an archive device
5 Video 1 (Composite)
Connects to a video input of another device, such as a TV or VCR
6 Audio Out (Left/Right)
Connects to RCA cables that send analog audio signals (left/right) to a stereo receiver or TV with stereo inputs
7 YPbPr
Connects to the component video input (YPbPr) on an HDTV. Do not use these cables if you are using the
HDMI connection
8 Out 2 (Secondary
Connects to either a VCR or to another set of inputs (composite) on your TV
Audio Out)
9 Digital Audio Out
Connects to an RCA cable that sends a digital audio signal to a surround-sound receiver or other digital audio device
10 S-Video Out
Connects to S-Video input of a standard TV or VCR
11 IR
Connector reserved for future use
12 Optical Audio Out
Connects to an optical cable that sends a digital audio signal to a surround-sound receiver or other digital audio device
13 Cable Out
Connects to a coaxial cable that sends analog audio and video signals to a TV or VCR. These signals are
SDTV video and stereo audio
14 HDMI
Connects an HDMI™ cable to the HDMI input of an HDTV. HDMI supports both digital audio and video. May be used
to connect to a DVI interface using an HDMI-to-DVI adapter for video and separate audio connections. Any of the
following audio connections may be used: Digital Audio Out (9); Audio Out: Left, Right (6); or Optical Audio Out (12)
15 M-CARD
Installed by your service provider
16 USB 2.0
Connects to external USB devices (Reserved for future use)
17 eSATA
Connects to an external Serial ATA (eSATA) hard disk drive for expanded drive space. A connected eSATA drive is
not an archival device. Ask your service provider for a list of approved hard drive models for use with the DVR
18 M-CARD Code Label
Contains M-CARD serial number and MAC address
19 1394
Connects to display devices equipped with a 1394 input
20 Ethernet
Connects to an Ethernet-equipped device (Reserved for future use)
21 AC Outlet
Connects to the AC power cord from another device, such as a TV
22 AC Power Input
Connects to the power cord to deliver power to the set-top
EXPLORER
®
8550HDC
™
Note: This illustration
may vary from the
actual product.
LIST
L AUDIO IN R
VIDEO IN
12
T13158
Safety and Performance Tips
• Keep the top of the DVR free of all objects
and electronic devices, including your TV.
• Always set the DVR on its feet, never on
its side.
MULTI-STREAM CABLE CARD
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Note: This illustration
AVIS:
RISQUE DE CHOC
M-CARD SN: PKCPKPDBT
ELECTRIQUE NE PAS OUVRIR
may vary from the
M-CARD MAC: 001AC326910A
120 VAC
60Hz 4.2A
500W
actual product.
CABLE OUT
1394
1394
USB 2.0
eSATA
120VAC
60Hz 80W
LISTED 14H1
VIDEO PRODUCT
13
14
16
17
19
20
21
22
12
15
18
T13200
Connection Example
ARCHIVE
OUT 1
OPTICAL
DIGITAL
VIDEO
VIDEO
Y
AUDIO
L
L
Pb
L
THIS DEVICE IS INTENDED TO BE ATTACHED TO A
RECEIVER THAT IS NOT USED TO RECEIVE OVER-THE-AIR
R
R
Pr
R
BROADCAST SIGNALS. CONNECTION OF THIS DEVICE
IN ANY OTHER FASHION MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS
AND IS IN VIOLATION OF THE FCC RULES, PART 15.
SCIENTIFIC-ATLANTA, INC.
CABLE
CATV CONVERTER
IN
MADE IN MEXICO
Cable
Input
WARNING:
S-VIDEO
Electric shock hazard!
Unplug all electronic
devices before connecting
or disconnecting any device
Y
VIDEO
cables to the DVR.
P
L/
MONO
AUDIO
P
R
HD 1
IN
Connecting to an HDTV with Component Input (YPbPr)
1. Insert the M-Card module if not already installed.
2. Connect the DVR to the coaxial cable coming from the wall.
3. Connect the Y (green) connector on the HDTV to the Y (green) connector on the DVR; connect the Pb (blue) connector on the HDTV to the Pb
(blue) connector on the DVR; and connect the Pr (red) connector on the HDTV to the Pr (red) connector on the DVR.
4. Connect the left audio (white) connector on the HDTV to the left audio (white) connector on the DVR, and connect the right audio (red)
connector on the HDTV to the right audio (red) connector on the DVR.
5. Plug the DVR and the HDTV into an AC power source. Do not press the Power key on the DVR yet.
Important: To potentially protect the DVR from power surge damage, ground (earth) your cable product to provide some protection against
voltage surges and built-up static charges. You may be able to reduce the risk of damage from voltage surges, which can be caused by
lightning storms and power outages, by plugging the DVR into a surge protector.
6. Wait several minutes for the DVR to receive the latest software, programming, and service information. One of the following will appear on
the front panel of the DVR:
• Current time: The update is complete.
• Four dashes (----): Call your service provider to get the DVR authorized.
7. To begin watching TV, turn on the HDTV and press Power on the front panel of the DVR, or press Power on the remote control.
U.S. Patents
A patent notice is afÞ xed to this product. In addition, the product may also be covered by one or more of the following patents:
4,498,169, 4,692,919, 4,748,667; 4,829,569; 4,866,770; 4,885,775; 4,888,799; 4,890,319; 4,922,456; 4,922,532; 4,924,498; 4,965,534; 4,991,011; 5,003,384; 5,012,510; 5,029,207;
5,045,816; 5,053,883; 5,054,071; 5,058,160; 5,142,575; 5,142,690; 5,146,526; 5,155,590; 5,214,390; 5,225,902; 5,225,925; 5,235,619; 5,237,610; 5,239,540; 5,241,610; 5,247,364;
5,255,086; 5,257,403; 5,267,071; 5,270,809; 5,271,041; 5,272,752; 5,282,028; 5,285,497; 5,287,351; 5,301,028; 5,309,514; 5,317,391; 5,319,709; 5,341,425; 5,347,388; 5,347,389;
5,357,276; 5,359,601; 5,361,156; 5,367,571; 5,379,141; 5,379,145; 5,381,481; 5,390,337; 5,400,401; 5,406,558; 5,418,782; 5,420,866; 5,420,923; 5,425,101; 5,428,404; 5,430,568;
5,434,610; 5,436,749; 5,438,370; 5,440,632; 5,442,472; 5,455,570; 5,457,701; 5,471,492; 5,477,199; 5,477,262; 5,477,282 5,477,370; 5,481,389; 5,481,542; 5,485,221; 5,493,339;
5,497,187; 5,500,758; 5,502,499; 5,506,904; 5,519,780; 5,539,822; 5,550,825; 5,579,055; 5,579,057; 5,583,562; 5,592,551; 5,596,606; 5,600,378; 5,602,933; 5,640,388; 5,657,414;
5,675,575; 5,684,876; 5,715,515; 5,724,525; 5,734,822; 5,740,300; 5,742,677; 5,754,940; 5,757,416; 5,771,064; 5,774,859; 5,825,829; 5,826,167; 5,850,305; 5,854,703; 5,870,474;
5,892,607; 5,920,626; 5,923,755; 5,930,024; 5,930,515; 5,937,067; 5,963,352; 5,966,163; 5,982,424; 5,991,139; 5,999,207; 6,005,631; 6,005,938; 6,016,163; 6,028,941; 6,029,046;
6,052,384; 6,055,244; 6,072,532; 6,105,134; 6,148,039; 6,157,719; 6,188,729; 6,195,389; 6,212,278; 6,215,530; 6,219,358; 6,240,103; 6,243,145; 6,246,767; 6,252,964; 6,272,226;
6,292,081; 6,292,568; 6,320,131; 6,374,275; 6,405,239; 6,411,602; 6,417,949; 6,424,714; 6,424,717; 6,433,906; 6,438,139; 6,463,586; 6,467,091; 6,476,878; 6,493,876; 6,510,519;
6,516,002; 6,516,412; 6,526,508; 6,538,595; 6,546,013; 6,560,340; 6,567,118; 6,570,888; 6,622,308; 6,629,227; 6,664,984; 6,667,994; 6,671,879; 6,674,967; 6,678,891; 6,714,598;
6,721,352; 6,721,956; 6,725,459; 6,738,982; 6,744,892; 6,744,967; 6,751,271; 6,760,918; 6,795,972; 6,802,077; 6,804,708; 6,811,447; 6,817,028; 6,822,972; 6,823,385; 6,832,386;
6,845,106; 6,868,473; 6,874,075; 6,889,191; 6,909,471; 6,917,622; 6,917,628; 6,922,412; 6,927,806; 6,928,656; 6,931,058; 6,937,729; 6,969,279; 6,971,008; 6,971,121; 6,978,310;
6,986,156; 6,988,900; 6,996,838; 7,010,801; 7,053,960; 7,065,213; 7,069,578; 7,069572; D348065; D354959; D359737; D363932; D390217; D434753; D507240; D507535;
D513407; D516518; RE36368; RE36988
MULTI-STREAM CABLE CARD
CAUTION
AUDIO
OUT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
RISQUE DE CHOC
M-CARD SN: PKCPKPDBT
ELECTRIQUE NE PAS OUVRIR
M-CARD MAC: 001AC326910A
IR
120 VAC
60Hz 4.2A
500W
1394
1394
CABLE OUT
USB 2.0
eSATA
120VAC
60Hz 80W
S-VIDEO
LISTED 14H1
OUT
VIDEO PRODUCT
Back of
AUDIO
DVI/HDCP
HDTV
CENTER
IN
CHANNEL IN
ON
OFF
AUDIO IN
DVI/HDCP
R
L
ANT (75 )
VIDEO
Y
ANT-1
L/
L
P
L
B
MONO
B
AUDIO
AUDIO
R
P
R
R
OUT
R
R
HD 2
ANT-2
IN
OUT
IN
T13201
20070417 Patents
Advertisement
