Sony HSCU-300 Operation Manual page 15

To change a menu item with multiple input
fields
Some menus have items with multiple input fields.
Moving the , arrow to an item with multiple input fields and
pressing the CONTROL knob displays the input fields. Each
field needs to be set separately. Turning the CONTROL knob
moves the cursor between input fields.
The following menu item has multiple input fields:
• NETWORK SETTINGS menu → <CNS SETTINGS> page
→ MASTER IP ADDRESS
1
Turn the CONTROL knob to move the , arrow to the
desired item, then press the CONTROL knob.
The , arrow changes to a flashing * asterisk. The input
fields are displayed. A second , arrow is displayed for
the input fields.
2
Turn the CONTROL knob to move the , arrow to the
desired input field, then press the CONTROL knob.
The , arrow changes to a flashing ? question mark.
3
Turn the CONTROL knob to change the setting.
To cancel a changed input field setting
Set the CANCEL/ENTER lever to the CANCEL position
before pressing the CONTROL knob. The field is restored
to its current setting. Other changed input fields are not
restored to their previous setting.
To suspend menu changes
Set the DISP/MENU lever to the MENU position to exit the
menu screen.
The DISP/MENU lever can be set to the MENU position
again to restart the operation.
4
Press the CONTROL knob.
The ? question mark changes back to the , arrow, and
the input field setting is registered.
5
Repeat steps 2 to 4 to change other input fields.
6
Turn the CONTROL knob to move the , arrow to
END, then press the CONTROL knob.
The * asterisk changes back to the , arrow, and all item
input field settings are registered.
To cancel all changed item settings
Turn the CONTROL knob to move the , arrow to ESC,
then press the CONTROL knob.
The * asterisk changes back to the , arrow, and all
changes are discarded.
To enter a character string
Some menu items require a character string input.
Moving the , arrow to an item with a character string input
and pressing the CONTROL knob displays a rectangular
cursor and a list of selectable characters. Turning the
CONTROL knob moves the cursor between characters.
The following menu item has character strings:
• CCU CONFIGURATION menu → <BAR CHARACTER>
page → BAR CHARACTER
1
Move the text cursor to the input position, then press
the CONTROL knob.
A second cursor is displayed in the character list.
2
Turn the CONTROL knob to move the cursor to the
desired character, then press the CONTROL knob.
Repeat steps 1 and 2 to enter other characters.
• Select INS to insert a space character at the cursor
position.
• Select DEL to delete the character at the cursor
position.
• Select RET to return to step 1 without changing the
string.
• Entering the maximum number of characters (up to the
right edge) moves the cursor to ESC on the lower right
of the character list.
3
Turn the CONTROL knob to move the cursor to END,
then press the CONTROL knob.
The new input string is registered.
To cancel the character string setting
Turn the CONTROL knob to move the cursor to ESC, then
press the CONTROL knob.
To exit the menu display
In menu display mode, set the DISP/MENU lever to the MENU
position.
15
Setup Menu