Table of Contents
Advertisement
7.
Place the hood assembly on to the hitch
assembly. Place both hood hinges between
the upper hitch mounts on the hitch assembly.
Be sure that the rubber seal is on the inside
of the hood. Place the (2) friction washers
between the hood hinge and the upper hitch
mount. Place (2)990563, 3/8 x 1 bolt thru the
hinge and mount. Secure with (2) 976979,
3/8 nyloc nut. Figure 4.
HOOD ASSEMBLY
RUBBER SEAL
ASSEMBLY
8.
Open the hood and secure the (2) springs
to the bolts on the hood assembly and the
hitch assembly. Figure 4.
3/8 X 1 BOLT
FIGURE 4
9
HOOD HINGE
SPRING
3/8 NYLOC NUT
UPPER HITCH MOUNT
HITCH PIN
Advertisement
Table of Contents
