Answering A Call Waiting - Panasonic KX-TD500 User Manual

2.4.4 Answering a Call Waiting

— Answering a call waiting in the system
— Answering a call waiting from the central office
Answering a call waiting in the system
During a conversation, a call waiting tone or voice announcement through the telephone speaker or
the handset occurs when an outside call is received or another extension is letting you know another
call is waiting. You can answer the second call by disconnecting the current call or placing it on hold.
To talk to the new party
PT / SLT
While hearing a tone
HOLD
OR
5
Press HOLD or
switchhook and dial 50.
Disregard this step if you
terminate the current call.
• By default, this feature is not available. To activate this feature, set to each desired mode
(1. BSS, 2. OHCA, 3. Whisper OHCA). Please refer to "2.7.3 Receiving a Call Waiting
(Call Waiting/Off-Hook Call Announcement [OHCA]/Whisper OHCA)" for further
information.
• Depending on the type of your telephone, the "Off-Hook Call Announcement [OHCA]" or
the "Whisper OHCA" functions can be applied. You can talk to the other party through the
speaker and the microphone (OHCA) or you only receive a call announcement through the
handset (Whisper OHCA), while you are having another conversation using the handset.
Please refer to "Sending a call waiting tone (Busy Station Signalling [BSS])" in "2.2.4
When the Dialled Line is Busy or There is No Answer" for further information.
• The calling extension's name or number is displayed for 5 seconds in 10 seconds intervals
before answering a call.
User Manual
(CO)
0
Press CO / INTERCOM / PDN / SDN or go
on-hook and then off-hook.
Disregard this step if both parties are extensions.
OR OR OR
INTERCOM (PDN)
OR
(SDN)
Operation
73